image Home Install Guides |  International Shipping & Policies  |  image image


Advanced Search
image
Categories

Panzer Skid Plates

"Deluxe" TDI Timing Belt Kits

TDI Race Pipe & EGR

Short Shift Kits

Clutch Upgrade Kit

A5 Jetta TDI

Timing Belt Kits for 1.8T

DSG Flywheels

Block Repair Kits

TDI Injection Pump

.
Items in your cart
Empty


image

image

Dieselgeek Race Pipe

Dieselgeek Race Pipe
SKU: RACEPIPE

Race Pipe for ALH engines for mid-'99 through 2003 Golf and Jetta TDI and all 1998-2003 New Beetle TDI (The Race Pipe is not meant for "PD" TDI engines). The Race Pipe replaces factory "throttle body". Increases top-end horsepower and eliminates intake manifold clogging forever!

Picture showing the air flow restriction of factory EGR valve as compared to the Race Pipe.

Picture of o-ring groove.

Picture of 1st generation green Race Pipe mounted to intake manifold.

Race Pipe Features:

* Boost port nipple available at no extra cost for easy and reliable boost gauge installation (shown above).
* No more manifold clogging! Soot can no longer accumulate inside intake manifold.
* Abrasive soot particles will never again be ingested into engine.
* Much lower air restriction nets 3 horsepower increase above 3000 rpms with better revving.
* Stealthy good looks!
* Better than factory quality!
* Counterculture appeal!

Kit Includes:

* Race Pipe with factory style o-ring seal
* Three Grade 12.9 zinc plated Allen screws for Race Pipe
* ¼” thick 6061-T6 aluminum block-off plate for EGR cooler (not available separately)
* Factory metal gasket for block-off plate
* Available 1/8” Brass boost port nipple with Febi Bilstein vacuum plug (port and plug fully installed)

To install Race Pipe:

Remove engine cover.
Remove rubber boost pipe from EGR valve and upper intercooler pipe, set aside.
Remove all four 6mm Allen screws for the accordion pipe leading from the EGR valve to the EGR cooler.
Remove large vacuum hose from vacuum diaphragm and plug it.  
Cut small vacuum hose to shut-off solenoid and plug it.
Remove all three 5mm Allen screws from the EGR valve.
Attach block-off plate with metal gasket to EGR cooler using two stock 6mm drive Allen screws.
Attach Race Pipe to intake manifold with three provided (longer) 5mm drive Allen screws.
Reattach rubber boost pipe to upper intercooler pipe and then attach boost hose to Race Pipe
Installed Race Pipe.  Green Race Pipe only shown for clarity of position. We only sell silver Race Pipes.
Place EGR valve and accordion pipe in a safe place for storage. A functional, non-leaking EGR valve has decent market value if you decide to sell it.  They are expensive new.

Note: This mod is for Off-Road Use Only and will most likely (approx 90% probability) give you a check engine light unless you turn EGR functionality off with chip tuning or by using an experimental "Maf twist"as described on TDIClub.com. We will not offer any tech help with a check engine light.

PRICE:  $120.00

Quantity 

Please select boost gauge nipple option: 

Try these related products:
Delete Kit for EGR Cooler only for Race Pipe users

 
 
   
 
E-commerce powered by ProStores
Copyright 2010 www.dieselgeek.com . All Rights Reserved.