Home > Panzer Parts > R32 2004 (MK4)
All of our skid plates come with all necessary hardware. We list individual pieces of hardware for sale below in case you have lost pieces or are installing your skid plate on a different car.

Here is the required parts list for the 2004 R32 Panzer plate:

Skid plate
2x Mounting posts
7x M10 Round body standard diameter rivnuts
1x Rivtool for setting rivnuts
9x M10-1.5 x 35mm Hex cap screws
10x Thick M10 fender washers
Optional: 1x Oil Drain Window Replacement Cover

Here are the required parts for the optional Full Metal Jacket side skirts:

4x Silver Dzus quarter turn pins
4x Silver Dzus clip on receptacles
2x M10 Sheetmetal nuts
2x Red plastic frame rail caps
1x Angle bracket and screw

Instructions links for the installing the MK4 Panzer Skid Plate kit are here .

Full hardware kit for Dieselgeek MK4 Panzer skid plate
Full MK4 Panzer Hardware Kit (includes New Beetle)
This is one full hardware kit for a MK4 Panzer Plate which includes New Beetle. Mounting posts, Rivtool, and Full Metal Jacket hardware sold separately. Includes our new, custom-hardened rivnuts. Saves time!

Our Price: $35.00
Sale Price: $29.00
Qty Add
MK4 Panzer skid plate mount post, single
MK4 Panzer Mounting Post
This is one single mounting post for the MK4 Panzer Plate kit including New Beetle.  The MK4 Panzer left and right side mounting posts are identical. Each skid plate needs two posts for proper installation. This part only works with the Dieselgeek Panzer Plate.

Our Price: $40.00
Qty Add
M10-1.5 rivet nut with custom large flanged head replacing VW part number N 908 106 02.
M10 Round body standard diameter rivnut
Better than N 908 106 02. This is one custom M10-1.5 round body hardened rivnut with a 23mm head diameter and 3mm head thickness. These are harder than stock with wider, more secure heads.

Our Price: $2.00
Qty Add
M10-1.5 x 35mm hex cap screw
M10 x 35mm Hex Cap Screw
This is one M10-1.5 x 35mm long hex cap screw, zinc plated, for use in all Panzer Plate kits. (1.5mm thread pitch and 17mm head)

Our Price: $1.00
Qty Add
Heavy fender washer with 1.25 diameter
M10 1/8" thick fender washer with 1.250" OD
This is one zinc plated 3/8" heavy fender washer that is 1/8" thick with an inside diameter of 10mm and an outside diameter of 1.25".

Our Price: $0.50
Qty Add
Rivnut setting tool for M10 rivet nuts
Rivtool for Setting Rivnuts
This is the Rivtool for setting the M10 rivnut anchors in the frame and subframe of MK4 chassis cars including the New Beetle. Can also be used on B5-B6-B7 series Audi A4, B5 Passat and the Audi TT as well.

Our Price: $8.00
Qty Add
8D0 805 960 Dzus Audi A4 and B5 Passat receptacle. Also for MK4 Panzer with FMJ.
Dzus Clip on Receptacle
This is one Dzus clip on receptacle for 1/4 turn Dzus pins. These are used on the MK4 Panzer's Full Metal Jacket side panel and on B5-B6-B7 Audi A4 Panzer and B5/5.5 Passat Panzer kits. The OE VW/Audi part number for this part is 8D0 805 960.

Our Price: $2.00
Qty Add
8D0 805 121 Dzus quarter turn locking pin for Audi A4 and B5 VW Passat. Also for MK4 Panzer with FMJ.
Dzus Quarter Turn Pin
This is one silver Dzus 1/4 turn pin and are 18mm long from under the head to the tip. These are used on the MK4 Panzer's Full Metal Jacket side panels and on B5-B6-B7 Audi A4 Panzer and B5/5.5 Passat Panzer kits. The OE VW/Audi part number for this pin is 8D0 805 121.

Our Price: $1.00
Qty Add
Driver side Full Metal Jacket for the Dieselgeek Panzer plate
Full Metal Jacket Side Skirt - Driver Side Only!
Our passenger side Full Metal Jacket side panel will not work on 2006 and newer 2.5L New Beetles since the 5 cylinder engines are a little too long. We offer this FMJ driver side panel for anyone with a 2.5L gas engine New Beetle who wants at least one FMJ aluminum side panel. The 2006-2010 New Beetle 2.5L gas powered cars will have to use the stock plastic panel on the passenger side with VW part number 1C0 825 250M. Comes with all necessary hardware.

Our Price: $49.00
Qty Add
VW Part number N 907 088 03
M10 Sheetmetal Nut for FMJ Side Panels
This is one sheet metal nut for the rear upper corner of left and right Full Metal Jacket side panels for the MK4 Panzer, including New Beetle. VW Part number N 907 088 03. Two maximum are all that will be required.

Our Price: $1.00
Qty Add
Passenger side Full Metal Jacket for the Dieselgeek Panzer plate
Full Metal Jacket Side Skirt - Passenger Side Only!
Comes with all necessary hardware.

Our Price: $49.00
Qty Add
MK4 Panzer Skid Plate Alone, Closed Drain Hole
This is ONLY a replacement Panzer Skid Plate for the MK4 models. No hardware is included with this kit.

Our Price: $129.00
Qty Add
MK4 Panzer oil drain hole cover, snap in
MK4 Oil Drain Window Replacement Cover
This is a replacement cover for our MK4 Panzer Skid plates with the oil drain cut out.

Our Price: $5.00
Qty Add
Brock CPT-15, 28mm body plug
Red plastic frame rail cap for Full Metal Jacket
This is one red plastic cap for the Full Metal Jacket side skirt kit. These push into the left and right side frame rails and keep the Full Metal Jacket side panels from rubbing the frame rails.

Our Price: $1.00
Qty Add
Angle bracket and 6mm-1.0 SEM mounting screw for Dieselgeek Full Metal Jacket side panel
Angle Bracket and Screw for Full Metal Jacket, driver side
This is the aluminum angle bracket and M6-1.0 sem screw for the driver side Full Metal Jacket side skirt.

Our Price: $5.00
Qty Add
Full Metal Jacket hardware set
Complete Full Metal Jacket Hardware Kit
This is the hardware kit for our Full Metal Jacket side skirts. It includes the red caps, Dzus screws and receptacles, and all other necessary hardware. This does not include the hardware for the Panzer Plate skid plate. That is offered separately.

Our Price: $18.00
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>