Home > Panzer Parts > Jetta Sportwagen 2011 - 2014 (MK6)
All of our skid plates come with all necessary hardware. We list individual pieces of hardware for sale below in case you have lost pieces or are installing your skid plate on a different car.

Here is the required parts list for the 2010 - 2014 Jetta Sportwagen Panzer plate:

Skid plate
1 each Left and Right Mounting brackets
4x 30mm Bevel nuts
3x M10 Hex body standard diameter rivnuts
3x M10-1.5 x 35mm Hex cap screws
3x Thick M10 fender washers
3x Black 8mm Locknuts
3x 9/16" washers
2x 12mm Jam nuts
2x 12mm x 30 hex cap screws
2x 12mm washers
2x 12mm x 100mm studs
2x 30mm Flat nuts
1x Blue Thread Locking Compound (Highly recommended)

Instructions for the installing the MK5/MK6 Panzer Skid Plate kit are here .

Full MK5 and MK6 Panzer Hardware Kit. Not for MK6 Jetta sedan.
Full MK5/MK6 Panzer Hardware Kit
This is one full hardware kit for a MK5/MK6 Panzer Plate. This kit does not include stainless mounting brackets.

Our Price: $49.00
Qty Add
6ml tube of blue thread locking compound
Blue Thread Locking Compound
This is one 6ml tube of blue thread locking compound. Use this to keep all of your Panzer hardware nice and tight! Tube has enough threadlocker to last for years.

Our Price: $7.00
Qty Add
M10-1.5 x 35mm hex cap screw
M10 x 35mm Hex Cap Screw
This is one M10-1.5 x 35mm long hex cap screw, zinc plated, for use in all Panzer Plate kits. (1.5mm thread pitch and 17mm head)

Our Price: $1.00
Qty Add
Heavy fender washer with 1.25 diameter
M10 1/8" thick fender washer with 1.250" OD
This is one zinc plated 3/8" heavy fender washer that is 1/8" thick with an inside diameter of 10mm and an outside diameter of 1.25".

Our Price: $0.50
Qty Add
M10-1.5 hexagonal body rivet nut with VW part number N 904 480 03.
Hex Rivnut
This is one 13mm hex body M10-1.5 rivnut for use with MK5, MK6 and B7 Passat Panzer Plate kits with VW part number N 904 480 03.

Our Price: $2.49
Qty Add
M12-1.5 large pattern hex nut with 30mm flats
30mm Flat Nut for MK5/MK6 Panzer
This is one custom made nut for use with MK5 and MK6 Panzer Plate kits. Thread size is M12-1.5mm and is 13mm thick with 30mm flats. Two maximum are all that will be required.

Our Price: $4.00
Qty Add
M12-1.5 large pattern hex nut with beveled edge and 30mm flats
30mm Bevel Nut
This is one custom made M12-1.5mm Bevel nut for use with MK5, MK6 and B7 Passat Panzer Plate kits. Has 30mm flats and is 12mm thick.

Our Price: $4.00
Qty Add
12mm-1.5 x 30mm hex cap screw
12mm x 30mm Hex Cap Screw
This is one 12mm-1.5 x 30mm long bolt for use with MK5, MK6 and B7 Passat Panzer Plate kit's front mounting post (1.5mm thread pitch).

Our Price: $1.00
Qty Add
7/16 Grade 8 SAE washer
12mm washer
This is one 12mm gold washer for use with MK5, MK6, and B7 Passat Panzer Plate kit's front mounting post. This is actually a 7/16" Grade 8 SAE washer.

Our Price: $0.50
Qty Add
M12-1.5 jam nut with zinc plating
12mm Jam Nut
This is one 12mm-1.5mm jam nut for use with MK5, MK6 and B7 Passat Panzer Plate kit's front mounting post. (1.5mm thread pitch)

Our Price: $0.50
Qty Add
M12-1.5 x 100mm stainless stud
12mm Stud for MK5/MK6 Panzer
This is one 12mm stainless steel stud, 100mm long, for use with MK5 and MK6 Panzer Plate kits. Thread pitch is 1.5mm.

Our Price: $5.00
Qty Add
9/16 SAE flat washer
9/16" Washer for MK5/MK6 Panzer
This is one very thin military-spec 9/16" washer for use with MK5 and MK6 Panzer Plate kits.

Our Price: $0.50
Qty Add
MK5 and MK6 Panzer Plate mounting post, single
MK5/MK6 Panzer Mounting Bracket
This is one mounting bracket for the MK5/MK6 Panzer Plate. If you are only purchasing one, please indicate whether you need a right (passenger side) or left (driver side) bracket in the order notes area of the checkout page.

Our Price: $40.00
Qty Add
8mm-1.25 locknut with integral Belleville washer
8mm Locknut for MK5/MK6 Panzer or Short Shifter
One 8mm-1.25 locknut for use with MK5 and MK6 Panzer Plate kits. Also used on the Sigma 5 and Sigma 6 Shifters.

Our Price: $1.00
Qty Add
MK5 and MK6 VW heavy duty Panzer skid plate alone without hardware
MK5/MK6 Panzer Plate Alone without hardware or mounting posts
This is one MK5/MK6 Panzer Plate by itself. This is one skid plate meant as a replacement for a badly damaged or lost skid plate. This part comes with absolutely nothing else including hardware, mounting brackets or Loctite.

Our Price: $140.00
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>