Home > Panzer Parts > Passat 2012 - 2016
All of our skid plates come with all necessary hardware. We list individual pieces of hardware for sale below in case you have lost pieces or are installing your skid plate on a different car.

Here is the required parts list for the 2012 - 2016 Passat Panzer plate:

Skid plate
1 each Left and Right Mounting brackets
2x 30mm Bevel nuts
4x M10 Hex body standard diameter rivnuts
1x Rivtool for installing rivnuts
4x M10-1.5 x 35mm Hex cap screws
4x Thick M10 fender washers
3x 8mm screws for rear of plate
1x 8mm triple square socket for rear screws
3x Rear aluminum spacers
2x 12mm Jam nuts
2x 12mm x 30 hex cap screws
2x 12mm washers
1x Blue Thread Locking Compound (Highly recommended)

Instructions for the installing the B7 Passat Panzer Skid Plate kit are here .

8mm triple square socket to remove and replace Panzer screws and drive axle bolts.
M8 Triple Square Socket for Late Panzers
This is the triple square socket in 3/8" drive for the three rear screws on MK6 Jetta Sedan and Passat B7 Panzer skid plates. Also used on MK4 door latch mechanisms.

Our Price: $6.00
Qty Add
Full hardware kit for a MK6 Jetta Sedan, 2012 and newer Beetle or B7 Passat
Full MK6/B7 Panzer Hardware Kit for MK6 Jetta Sedan, MK6 Beetle, and B7 Passat
This is one full hardware kit for a MK6 Jetta Sedan, 2012 and newer Beetle or B7 Passat Panzer Plate. Does not include mounting brackets. Saves time!

Our Price: $49.00
Qty Add
6ml tube of blue thread locking compound
Blue Thread Locking Compound
This is one 6ml tube of blue thread locking compound. Use this to keep all of your Panzer hardware nice and tight! Tube has enough threadlocker to last for years.

Our Price: $7.00
Qty Add
M10-1.5 x 35mm hex cap screw
M10 x 35mm Hex Cap Screw
This is one M10-1.5 x 35mm long hex cap screw, zinc plated, for use in all Panzer Plate kits. (1.5mm thread pitch and 17mm head)

Our Price: $1.00
Qty Add
Heavy fender washer with 1.25 diameter
M10 1/8" thick fender washer with 1.250" OD
This is one zinc plated 3/8" heavy fender washer that is 1/8" thick with an inside diameter of 10mm and an outside diameter of 1.25".

Our Price: $0.50
Qty Add
M10-1.5 hexagonal body rivet nut with VW part number N 904 480 03.
Hex Rivnut
This is one 13mm hex body M10-1.5 rivnut for use with MK5, MK6 and B7 Passat Panzer Plate kits with VW part number N 904 480 03.

Our Price: $2.49
Qty Add
M12-1.5 large pattern hex nut with beveled edge and 30mm flats
30mm Bevel Nut
This is one custom made M12-1.5mm Bevel nut for use with MK5, MK6 and B7 Passat Panzer Plate kits. Has 30mm flats and is 12mm thick.

Our Price: $4.00
Qty Add
12mm-1.5 x 30mm hex cap screw
12mm x 30mm Hex Cap Screw
This is one 12mm-1.5 x 30mm long bolt for use with MK5, MK6 and B7 Passat Panzer Plate kit's front mounting post (1.5mm thread pitch).

Our Price: $1.00
Qty Add
7/16 Grade 8 SAE washer
12mm washer
This is one 12mm gold washer for use with MK5, MK6, and B7 Passat Panzer Plate kit's front mounting post. This is actually a 7/16" Grade 8 SAE washer.

Our Price: $0.50
Qty Add
M12-1.5 jam nut with zinc plating
12mm Jam Nut
This is one 12mm-1.5mm jam nut for use with MK5, MK6 and B7 Passat Panzer Plate kit's front mounting post. (1.5mm thread pitch)

Our Price: $0.50
Qty Add
One right or left MK6 Jetta, 2012-2016 Beetle and Passat skid plate mounting bracket
Mounting Bracket Set for MK6 Jetta Sedan, MK6 Beetle, and B7 Passat
This is a complete set of left and right heavy duty stainless steel mounting brackets for MK6 Jetta Sedan, MK6 Beetle, and B7 Passat. You can buy these to allow use of MK5 Panzer on MK6 Jetta Sedan or 2012 or newer Passat or Beetle. Contact us if you only need a left or right bracket.

Our Price: $80.00
Qty Add
8mm-1.25 socket cap screw, zxn drive with VW part number N 910 097 01
8mm Rear Screw for MK6 and B7 Passat Panzer
This is one M8-1.25 x 25mm long triple square drive screw for use in all MK6 Jetta Sedan, 2012 and Newer Beetle and B7 Passat Panzer Plate kits. The OE VW part number is N 910 097 01. Three are required per skid plate.

Our Price: $1.50
Qty Add
Rivet nut setting tool for B7 Passat and MK6 Jetta Panzer plate kits
Rivtool for MK6 and B7 Passat Panzer
This is one V2 Rivtool for use in all MK6 Jetta Sedan, 2012 and Newer Beetle and B7 Passat Panzer Plate kits. These are required to install the hex body rivnuts.

Our Price: $8.00
Qty Add
B7 Passat and MK6 Jetta Sedan rear spacers for Panzer Plate
Rear aluminum spacer for MK6 and B7 Passat Panzer
This is one aluminum spacer for use in all MK6 Jetta Sedan, 2012 and Newer Beetle and B7 Passat Panzer Plate kits. Three are required per skid plate.

Our Price: $1.50
Qty Add
B7 Passat heavy duty skid plate without mounting hardware
B7 Panzer Plate Alone without hardware or mounting posts
This is one B7 Panzer Plate by itself. This is one skid plate meant as a replacement for a badly damaged or lost skid plate. This part comes with absolutely nothing else including hardware, mounting brackets, Rivtool or Loctite.

Our Price: $140.00
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>